Line System 310K

The package

Commercial-bin line with three main storage destinations. One support tower surrounds the separate 8,000 BPH wet and 5,000 BPH dry elevators. A mixed-flow dryer handles drying. An overhead conveyor fills the bins along the storage row, with reclaim and service access below.

Package family

Line system

Storage design goal

310,000 bu

Approx. dry storage

321,825 bu

Wet holding

Individual vessel capacity requires model review

Loadout storage

Separate vessel scope and capacity require review

Dry storage bins

3

Drafting reference

New facility concept

Why this layout works

Support both elevators inside one shared tower while keeping wet and dry grain paths separate. Receiving moves to wet holding, then through the mixed-flow dryer and back to the dry elevator. An overhead conveyor fills the bins along the storage row. Gravity spouting is laid out at 40–45° from horizontal; horizontal travel uses conveyors. Bin reclaim returns at ground level for loadout.

Room to grow

Extend the overhead conveyor and reclaim corridor at the open end of the row. Review the 8,000 BPH wet and 5,000 BPH dry handling basis, dryer output and tower loads before adding storage.

The approximate dry-storage figure is a planning reference, not a guaranteed finished capacity. Wet holding and loadout storage are not included in that figure. Individual vessel capacities and model mappings require review before a final proposal.